The E Power 4 multi-function battery has a very clever method of making adjustments to the wattage settings; To increase the wattage select the wattage adjustment programme and then simply tilt the E Power 4 to the right, the wattage will increase, when the desired wattage setting is reached simply bring the E power back to vertical: the wattage selection will be stored. To decrease the wattage again select the wattage adjustment programme and tilt the E power to the left, the wattage will decrease, when the desired wattage setting is reached bring the E Power back to vertical: the wattage selection will be stored.
This tilt feature can also be used to turn the unit on and off. (When in the on-off programme).
As an electronic cigarette battery, the E Power 4 performs to a very high standard and is packed full of the latest technology and safety features. The device is equipped with variable wattage, (the voltage is adjusted automatically).
The E Power 4 will work with most E-Cigarette tanks (that are equipped with 510 female threading). A beauty ring is also included for use with larger mod tanks.
It is also equipped with an Ohms reader that will check the resistance of your atomizer tank, the advanced LED Screen allows you to customise your own vaping experience whilst displaying: The wattage setting, the voltage setting, battery condition and Ohms reading.
The E power 4 is a real power house and has been designed to get the very best vaping experience from atomizer tanks ranging from 1.0 to 3.0 ohms resistance. The E power 4 is finished to an extremely high standard in 2 attractive colours. Full instructions are provided with the kit.
Brief list of Features
• Constant output mode will automatically adjust to the Atomizer resistance during use ensuring a constant high quality vape
• Variable Wattage can be adjusted from 7 to 35 watts in 0.1w increments
• Automatic Voltage adjustment
• Reverse battery protection
• Tilt adjustment feature
• Single battery (3.7v)operating parameter 3.2 to 8.4v
• Low voltage alarm
• Short circuit protection
• Low Impedance protection
• USB socket for mobile phone charging
To use the E Power as emergency power for your mobile telephone: Ensure the E Power is fully charged.
Plug the standard USB (attached to the white multi cable) in to the large USB port located in the side of the E Power. At the opposite end of the cable you will notice a multi pin USB adaptor for use with iPhone: Enter this plug in to the base of the telephone. Select the mobile programme in the function settings and tilt the E Power to the Right this will start the charging process. When the telephone is fully charged simply tilt the E power to the left to turn off and then disconnect. You can use your telephone at the same time as it is charging but you cannot use the E power 4 as an electronic cigarette at the same time as you are charging your telephone.
To re-charge the E Power 4
1. Plug the mini USB in to the mini USB port located just under the large USB port on the side edge of the E Power (ensure that this plug is the correct way round as it will only fit one way).
2. Plug the standard single USB in to the USB Port on the underside of a good quality wall charger. Plug in the wall charger and switch on.
The E Power 4 is equipped with pass through facility that enables you to vape at the same time as you are re-charging the Battery.
The E Power 4 kit includes the following items:
• The E Power 4 battery in a choice of Matt carbon Black or Matt Stainless Steel
• Multi head USB Cable
• User Manual
• Gift box packaging
• Beauty Ring
• Lightweight made from Zinc alloy. Wear-resistant: Weight = 170grams
• External dimensions: L118*W48.5*16.5mm thick
• Fitting: EGO 510 Threading
Why not upgrade to the E Power 4 Bundle which includes the following Items:
1. The E Power 4 Kit
2. Cybercig Wall Charger
3. Innokin iClear XL Pyrex Atomizer Tank
4. 3 x 2.1ohm spare coils for the iClear XL Tank
Please select your E-Liquid Flavour
© E. Smoking Products Limited 2016
Creative Web Design by Prototype Creative